It is used for the cold bonding of plastic laminate, solid wood, fillets, plywood and chipboard.
Having a long open time and a good setting speed the product obtain good results also with
bonding of hardwood
FORM: white liquid
VISCOSITY Brookfield at 23°C g6/20rpm: 22000 - 28000 mPa.s
MINIMUM FILM-FORMING TEMPERATURE: +3°C
OPEN TIME at 20°C and with normal conditions 15 - 20 minutes
WOOD, ROOM AND GLUE TEMPERATURE: 18 - 22 °C
WOOD HUMIDITY CONTENT: 9 - 12 %
RELATIVE HUMIDITY: 65 - 75 %
COATING: 120 - 220 g/m2
SETTING TIME with solid soft wood at 20°C 30 - 40 minutes
50°C 40 sec./mm thikness
70°C 30 sec./mm thikness
Higher temperature could create problem on the wood.
By means of glue applicator with rollers, spatula, brush, nozzle also with pressure systems.
WARNING: do not use iron materials.
Clean glue applicators and equipment with hot water
Shelf life: 12 months at 20°C in original closed packages.
To store the product at temperature higher than 30°C may cause an alteration of it.
STORAGE TEMPERATURE NOT BELOW 10°C.